Shenzhen Zhonghu Automation Equipment Co., Ltd.

              Consulting Hotline0755-2728-6106

              Phone number13312911695

              Industry news

              Recommended products

              Contact us

              Consulting Hotline:0755-2728-6106

              Company name: Shenzhen Lake automation equipment Co., Ltd.
              Telephone: 0755-2728-6106
              Fax: 0755-27427175
              Mobile phone: 136-3286-0790
              Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen

              Tips for LED power filling machine while operating and replacing glue

              source: Shenzhen Zhonghu Automation Equipment Co., Ltd.hits:3108ArticlePostTime:2017-10-21 14:41:26sml

              LED power supply plastic irrigation machine is an automatic irrigation machine for AB glue, LED power supply glue machine the correct method of operation on the stability of the filling machine has a very important role in the replacement of glue should also pay attention to a series of methods, The following look at the LED power supply plastic filling machine specific operational considerations and replace the glue precautions.

              LED power supply filling machine operation Note:
              1. Turn on the power of the whole machine, open the PLC filling program;
              2. Check whether the air pressure is more than 5 kg;
              3. Open the barrel to stir the glue to fully stir and turn off, check the bucket is no material and open the two barrels of the ventilation ball valve;
              4. Check the ratio and the amount of glue before work is normal;
              5. Check the work of the origin (PLC is the starting point) is set with the point before the deviation, if any deviation must be corrected back to the original set of points can run the program;
              6. Machine in the production process to pay attention to the curing effect of the product;
              7. After the machine to complete the work of the mixing tube to be cleaned in time, respectively, out of A, B two kinds of plastic, and then rinse with a cleaning solution (such as B plastic and air contact with the crystallization of butter can be used to block the mouth)
              8. The machine does not work to close the barrel of the ventilation ball valve to prevent glue and air contact;
              9. Turn off the machine and turn off the machine. The programming machine to return to the machine origin and then to the work of the origin [PLC is the machine origin] program to save, reset to start work;
              10. Do the machine surface clean.

              LED power supply glue machine replacement glue Note:
              1. Please check with glue supplier glue cleaning agent;
              2. Close the bottom of the AB bucket valve;
              3. Operation equipment out of the plastic, will remain in the valve, high pressure Teflon tube, AB pump inside the glue to observe the plastic valve out of plastic glue changes, to determine the internal glue has been emptied;
              4. Turn off the total power of the equipment;
              5. Open the barrel at the bottom of the hose, open the valve, the barrel will be excess glue discharged;
              6. Closed barrel at the bottom of the valve, the amount of cleaning agent will be poured into the barrel, the barrel wall and barrel bottom of the residual glue thoroughly cleaned;
              7. Open the bottom of the bucket valve, the sewage discharge, the barrel can not have residue;
              8. Remove the AB pump, clean the pump inside the glue (need to be dismantled pump training personnel to operate this);
              9. will be clean AB pump back in place, and barrels of barrels re-connected;
              10. Replacement of high pressure Teflon tube;
              11. Put in new glue;
              12. Open the device, move the plastic 3 to 5 minutes to confirm the normal glue glue;
              13. Redistribution of AB glue ratio.

              Shenzhen Zhonghu Automation Equipment Co., Ltd. (http://www.szzhonghu.com) is a provider of plastic irrigation machine, power filling machine, Dijiao machine, crystal Dijiao machine, light bar Dijiao machine, with plastic machine High-end manufacturing assembly solutions for automation equipment providers and system integrators. Business advice hotline: 136-3286-0790, we're looking foward to your cooperation!


              Keywords:
              • Scan, focus on us

              亚洲视频日韩视频| 亚洲aⅴ无码专区在线观看| 色噜噜亚洲男人的天堂| 亚洲香蕉免费有线视频| 亚洲四虎永久在线播放| 亚洲高清在线播放| 亚洲丝袜美腿视频| 亚洲高清视频免费| 亚洲国产精品久久网午夜| 亚洲美女视频免费| 亚洲国产中文在线二区三区免| 亚洲精品不卡视频| 亚洲福利视频一区二区三区| 亚洲午夜精品一区二区公牛电影院 | 亚洲七久久之综合七久久| 中文无码亚洲精品字幕| 亚洲日韩精品无码AV海量| 亚洲成av人片在线天堂无| 精品久久亚洲一级α| 亚洲国产免费综合| 区久久AAA片69亚洲| 亚洲成色在线综合网站| 亚洲综合视频在线| 亚洲国产日产无码精品| 亚洲sss综合天堂久久久| 亚洲欧洲免费无码| 国产精品成人亚洲| 国产日韩成人亚洲丁香婷婷| 亚洲精品成人无限看| 亚洲ⅴ国产v天堂a无码二区| 亚洲视频一区二区在线观看| 久久精品国产亚洲av麻豆图片 | 久久亚洲高清观看| 亚洲日本精品一区二区| 亚洲国产精品久久人人爱| 亚洲一区二区三区在线观看网站| 春暖花开亚洲性无区一区二区| 亚洲成人高清在线| 亚洲国产精品嫩草影院在线观看| 亚洲黄色三级视频| 亚洲人成网站18禁止|